General Industrial
Showing 1–20 of 27 results
- Our 1220 neoprene blend foam is a top material for almost every industry we serve. This black closed cell foam is used in a wide variety of tape, sealing and gasket applications. Our 1220 is a 6 pcf, 2A1 grade of foam with a service temperature range of - 40 °F to 200 °F (high continuous use) or 250 °F (high intermittent use).1220Kanban InventoryShore Hardness
40 - 50
Density4 - 8PCF (lb/ft³)
64 - 128Kg/m³
Compression2 - 5psi
13.7 - 34.4kPA
Service Temperature-40 - 250°F
-40 - 121°C
- Our 1231 elastomeric blended foam is used in a wide variety of tape, sealing and gasket applications. It comes in Black and has a 4 - 9 PCF / 64 - 144 kg/m³ density range and is a 2C1 grade of foam. Service temperature range is - 40 °F to 150 °F for high continuous use or 200 °F (high intermittent use). The foam can be used for UL50 & UL50E Gaskets & Seals. It has a Resilience rate of 15% and a Fluid Immersion rate of 250%.1231Kanban InventoryShore Hardness
40 - 60
Density4 - 9PCF (lb/ft³)
64 - 144Kg/m³
Compression2 - 5psi
13.7 - 34.4kPA
Service Temperature-40 - 200°F
-40 - 93°C
- Our 1240 neoprene blend is a RE42/2A2 grade, black closed-cell foam used in various applications. The density is 4.0 -8.0 PCF / 64 - 128 kg/m³ with a service temperature range of - 40 °F to 200 °F (high continuous use) or 250°F (high intermittent use). It has an Ozone Resistance Rating of “O” and Thermal Conductivity of 0.30 K Factor.1240Kanban InventoryShore Hardness
45 - 55
Density4 - 8PCF (lb/ft³)
64 - 128Kg/m³
Compression5 - 9psi
34.4 - 62kPA
Service Temperature-40 - 250°F
-40 - 121°C
- Our 1260 neoprene blend is a RE43/2A3 grade, black closed-cell foam used in various applications. The density is 7 – 11 PCF / 112 – 176 kg/m³ with a service temperature range of - 40 °F to 200 °F (high continuous use) or 250°F (high intermittent use). It has a Resilience rating of 20%.1260Kanban InventoryShore Hardness
55 - 65
Density7 - 11PCF (lb/ft³)
112 - 176Kg/m³
Compression9 - 13psi
62 - 89kPA
Service Temperature-40 - 250°F
-40 - 121°C
- Our 1275 PVC / NBR blend is a 10 – 15 PCF / 160 – 240 kg/m³ foam, supplied in natural and gray. This material was designed for use in the automotive market but can be utilized in a variety of gasket applications.1275Kanban InventoryShore HardnessDensity
10 - 15PCF (lb/ft³)
160 - 240Kg/m³
Compression13 - 17psi
89 - 117kPA
Service Temperature-40 - 200°F
-40 - 93°C
- Our 1290 neoprene blend foam has a density of 10 – 14 PCF / 160 – 224 kg/m³ and is sold into most industries we serve. This foam is used in a wide variety of tape, sealing and gasket applications. Our 1290 is a 2A5 grade of foam with a service temperature range of - 40°F to 200 °F (high continuous use) or 250 °F (high intermittent use).1290Kanban InventoryShore Hardness
65 - 75
Density10 - 14PCF (lb/ft³)
160 - 224Kg/m³
Compression17 - 25psi
117 - 172kPA
Service Temperature-40 - 250°F
-40 - 121°C
- Our 1336 is a closed-cell 6 PCF / 96 kg/m³ PVC foam. This material is used for a wide variety of automotive gasketing applications. It has a (90°) Peel Adhesion of 20 oz/in.1336Kanban InventoryShore HardnessDensity
6 - 6PCF (lb/ft³)
96 - 96Kg/m³
Compression.5 - .5psi
3.4 - 3.4kPA
Service Temperature - Our 1955 product is a 6 oz sq yd, non-woven, unsupported needled felt material. The composition of this material is 50% wool (+/- 10%) and 50% Rayon (+/- 10%). The standard thickness for this material is 0.035 – 0.055 inch, with a temperature range of -60 – 200 F.1955Kanban Inventory
- 4114-E is an EPDM foam with a density range of 4.5 – 7 PCF / 72 – 112 kg/m³. This material is used in automotive and general industrial applications. It comes in black and is a 2A1 grade of foam with a service temperature range of -90 °F to 275 °F. This product has excellent Ozone and UV resistance.4114-EKanban InventoryShore Hardness
30 - 50
Density4.5 - 7PCF (lb/ft³)
72 - 112Kg/m³
Compression2 - 5psi
13.7 - 34.4kPA
Service Temperature-90 - 275°F
-67 - 135°C
- 4115-E is an EPDM foam with a density range of 9 – 14 PCF / 144 – 224 kg/m³. This material is used in automotive and general industrial applications. It comes in black and is a 2A1 grade of foam with a service temperature range of -90 °F to 275 °F. This product has excellent Ozone and UV resistance.4115-EKanban InventoryShore Hardness
30 - 50
Density9 - 14PCF (lb/ft³)
144 - 224Kg/m³
Compression2 - 5psi
13.7 - 34.4kPA
Service Temperature-90 - 275°F
-67 - 135°C
- 4116-S is a neoprene blended foam with a density range of 4.5 – 6.5 PCF / 72 – 104 kg/m³. This material is used in automotive and general industrial applications. It comes in black and is a 2A1 grade of foam with a service temperature range of - 70 °F to 158 °F. It has good Ozone resistance, and fair UV resistance.4116-SKanban InventoryShore Hardness
30 - 50
Density4.5 - 6.5PCF (lb/ft³)
72 - 104Kg/m³
Compression2 - 5psi
13.7 - 34.4kPA
Service Temperature-70 - 158°F
-56 - 70°C
- 4117-VI is a Vinyl Nitrile foam with a density range of 4 – 7 PCF / 64 – 112 kg/m³. This material is used primarily in automotive applications. It comes in black and is a 2B0/1 grade of foam with a service temperature range of -70 °F to 158 °F. It has good Ozone resistance, and fair UV resistance. It has a Fuel B resistance of 100%.4117-VIKanban InventoryShore Hardness
15 - 35
Density4 - 7PCF (lb/ft³)
64 - 112Kg/m³
Compression1 - 3psi
6.9 - 20.6kPA
Service Temperature-70 - 158°F
-56 - 70°C
- 4311-N has a density range of 8 – 13 PCF / 128 – 208 kg/m³. This material is primarily used in automotive and general industrial stripping applications. It comes in black and is a 2A3 grade of foam with a service temperature range of -70 °F to 225 °F. It has good Ozone resistance, and fair UV resistance.4311-NKanban InventoryShore Hardness
50 - 70
Density8 - 13PCF (lb/ft³)
128 - 208Kg/m³
Compression9 - 13psi
62 - 89.6kPA
Service Temperature-70 - 225°F
-56 - 107°C
- 4511-N is a blended neoprene foam with a density range of 12 – 20 PCF / 192 – 320 kg/m³. This material is primarily used in automotive and general industrial applications. It comes in black and is a 2A5 grade of foam with a service temperature range of -70 °F to 225 °F. It has good Ozone resistance, and fair UV resistance.4511-NKanban InventoryShore Hardness
65 - 70
Density12 - 20PCF (lb/ft³)
192 - 320Kg/m³
Compression17 - 24psi
117 - 165kPA
Service Temperature-70 - 225°F
-56 - 107°C
- 6035PC is a 5.0 mil, pressure sensitive adhesive transfer tape with 4.2 mil, 58 lb poly coated kraft paper liner.6035PCKanban Inventory
- 93020LE is a double coated system, with 3.7 mil 300LSE adhesive on each side of a 0.5 mil mylar carrier and a 4.2 mil 58 lb. poly coated kraft paper liner. This adhesive provides outstanding adhesion to low surface energy plastics, powder coated paints and lightly oiled metals. Ideal application temperature range is -40 F to 300 F (-40 C to 148C).93020LEKanban Inventory
- 9472LE is a 5.0 mil 300LSE low surface energy acrylic adhesive on a 4.2 mil 58 lb. poly coated kraft paper liner. The 5 mil adhesive assures positive bonding to textured LSE plastics, powder coatings and oily metals. This adhesive provides good chemical and moisture resistance while the poly coated kraft paper liner maintains moisture stability. Ideal application temperature range is 70 F to 100 F (21 C to 38 C)9472LEKanban Inventory
- Evazote EV45CN EVA (Ethylene Vinyl Acetate) foam has a density of PCF / 50 kg/m³ and features conductive properties. It comes in Black and is a closed-cell, cross-linked EVA copolymer foam manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It has a cell size of 0.4 mm and a thermal conductivity of 0.038 W/m.K.EV45CNKanban InventoryShore Hardness
52 - 52
Density3.12 - 3.12PCF (lb/ft³)
50 - 50Kg/m³
Compression8.8 - 8.8psi
61 - 61kPA
Service Temperature-94 - 158°F
-70 - 70°C
- Plastazote HD110 is a closed-cell, cross-linked polyethylene foam blended a nominal density of 6.8 PCF / 110 kg/m³. It comes in Black or White. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 1.05 mm and a thermal conductivity of 0.0769 W/m.K.HD110Kanban InventoryShore Hardness
83 - 83
Density6.8 - 6.8PCF (lb/ft³)
110 - 110Kg/m³
Compression117 - 117psi
809 - 809kPA
Service Temperature-94 - 266°F
-70 - 130°C
- Plastazote HD30 is a closed-cell, cross-linked polyethylene foam blended a nominal density of 1.9 PCF / 30 kg/m³. It comes in Black or White. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.4 mm and a thermal conductivity of 0.0471 W/m.K.HD30Kanban InventoryShore Hardness
73 - 73
Density1.9 - 1.9PCF (lb/ft³)
30 - 30Kg/m³
Compression22.9 - 22.9psi
158 - 158kPA
Service Temperature-94 - 248°F
-70 - 120°C
Material Database
Material Database
Our inventory offering of raw materials can fluctuate based on ongoing custom projects. Some materials may not be available at the time of your inquiry. Please let us know the material(s) you need and we will work with you to find a solution.
Material categories
- Foams
- Cork
- ECH
- Elastomeric Blend
- EPDM
- EPDM / Butyl Blend
- EPDM / Butyl / PE Blend
- EPDM / SBR Blend
- EVA
- EVA / Polyethylene
- Micro-cell Urethane
- Natural Rubber
- Neoprene Based
- Neoprene / EPDM / SBR Blend
- Neoprene / EPT / SBR Blend
- Neoprene / SBR Blend
- Polyester Urethane
- Polyethylene
- Polyether Urethane
- PVC
- PVC / NBR Blend
- PVC / NBR / Neoprene Blend
- Reticulated Urethane
- Adhesives
- Textiles
- Construction Products
- Corraflex
Quotes
Our customers tell us every day how much they appreciate our quick turnaround on quotes. If the requested material is in our Kanban inventory, you’ll have our quote in your inbox before any of our competitors.
Material Samples
Kanban material samples are available in 12" x 12" swatches. If a sample needs to be cut to a custom thickness, size or shape, simply let us know. We will try to produce your item as quickly as possible. If you require a unique material, J&T will work with our supply base to locate the right item. Of course, we will always recommend suitable materials as a second option, should we have direct access to them.