Electronics
Showing all 0 results
- Our black 1224 closed-cell foam is a 2B1 grade of foam and one of our most popular materials. This material is used in a wide range of applications. This material is a 2B1 grade of foam, with an average density of 3-5 PCF / 48 – 80 kg/m³. It has a Fluid Immersion rate of 250%.1224Kanban InventoryShore HardnessDensity
3 - 5PCF (lb/ft³)
48 - 80Kg/m³
Compression2 - 5psi
13.7 - 34.4kPA
Service Temperature - 4116-S is a neoprene blended foam with a density range of 4.5 – 6.5 PCF / 72 – 104 kg/m³. This material is used in automotive and general industrial applications. It comes in black and is a 2A1 grade of foam with a service temperature range of - 70 °F to 158 °F. It has good Ozone resistance, and fair UV resistance.4116-SKanban InventoryShore Hardness
30 - 50
Density4.5 - 6.5PCF (lb/ft³)
72 - 104Kg/m³
Compression2 - 5psi
13.7 - 34.4kPA
Service Temperature-70 - 158°F
-56 - 70°C
- Our 5440 foam is a black closed-cell 7.5 PCF / 120 kg/m³ EPDM 2A2 /RE42 grade product. This material is used in automotive electrical components due to its high resistance to corrosion. 5440 EPDM has good UV resistance capabilities and is suitable for outdoor applications and contains NO Sulphur. It has a very good Air+UV resistance and an Ozone resistance of 48H/200pphm as tested by ASTM D1149.5440Kanban InventoryShore Hardness
45 - 55
Density6.2 - 8.7PCF (lb/ft³)
100 - 140Kg/m³
Compression5 - 9psi
34 - 62kPA
Service Temperature-40 - 266°F
-40 - 130°C
- Our 6154 foam is a black micro-cellular urethane material with a density rating of 15 PCF / 240 kg/m³. This material has good UV, Ozone, Corrosion, Fogging, and Bacteria resistance, exceptional recover capabilities and provides optimal compression set performance.6154Kanban InventoryShore HardnessDensity
13.5 - 16.5PCF (lb/ft³)
216 - 264Kg/m³
Compression4 - 8psi
27.5 - 55.1kPA
Service Temperature-40 - 250°F
-40 - 121°C
- Our 6205 foam is a black micro-cellular urethane material with a density rating of 20 PCF / 320 kg/m³. This material has good UV, Ozone, Corrosion, Fogging, and Bacteria resistance, exceptional recover capabilities and provides optimal compression set performance.6205Kanban InventoryShore HardnessDensity
18 - 22PCF (lb/ft³)
288 - 352Kg/m³
Compression13 - 23psi
89 - 158kPA
Service Temperature-40 - 250°F
-40 - 121°C
- 93020LE is a double coated system, with 3.7 mil 300LSE adhesive on each side of a 0.5 mil mylar carrier and a 4.2 mil 58 lb. poly coated kraft paper liner. This adhesive provides outstanding adhesion to low surface energy plastics, powder coated paints and lightly oiled metals. Ideal application temperature range is -40 F to 300 F (-40 C to 148C).93020LEKanban Inventory
- 9472LE is a 5.0 mil 300LSE low surface energy acrylic adhesive on a 4.2 mil 58 lb. poly coated kraft paper liner. The 5 mil adhesive assures positive bonding to textured LSE plastics, powder coatings and oily metals. This adhesive provides good chemical and moisture resistance while the poly coated kraft paper liner maintains moisture stability. Ideal application temperature range is 70 F to 100 F (21 C to 38 C)9472LEKanban Inventory
- Evazote EV45CN EVA (Ethylene Vinyl Acetate) foam has a density of PCF / 50 kg/m³ and features conductive properties. It comes in Black and is a closed-cell, cross-linked EVA copolymer foam manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It has a cell size of 0.4 mm and a thermal conductivity of 0.038 W/m.K.EV45CNKanban InventoryShore Hardness
52 - 52
Density3.12 - 3.12PCF (lb/ft³)
50 - 50Kg/m³
Compression8.8 - 8.8psi
61 - 61kPA
Service Temperature-94 - 158°F
-70 - 70°C
- Plastazote LD24FR is a closed-cell, cross-linked polyethylene foam blended with a flame retardant. It has a nominal density of 1.5 PCF / 24 kg/m³. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.3 mm and a thermal conductivity of 0.0351 W/m.K.LD24FRKanban InventoryShore Hardness
49 - 49
Density1.5 - 1.5PCF (lb/ft³)
24 - 24Kg/m³
Compression7.4 - 7.4psi
51 - 51kPA
Service Temperature-94 - 212°F
-70 - 100°C
- Plastazote LD30SD is aclosed-cell, cross-linked polyethylene foam with with static dissipative capabilities and has a nominal density of 1.9 PCF / 30 kg/m³. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.3 mm and a thermal conductivity of 0.039 W/m.K.LD30SDKanban InventoryShore Hardness
62 - 62
Density1.9 - 1.9PCF (lb/ft³)
30 - 30Kg/m³
Compression11.3 - 11.3psi
78 - 78kPA
Service Temperature-94 - 203°F
-70 - 95°C
- Plastazote LD45FR is a closed-cell, cross-linked polyethylene foam blended with a flame retardant. It has a nominal density of 2.8 PCF / 45 kg/m³. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.4 mm and a thermal conductivity of 0.043 W/m.K.LD45FRKanban InventoryShore Hardness
60 - 60
Density2.8 - 2.8PCF (lb/ft³)
45 - 45Kg/m³
Compression12.4 - 12.4psi
86 - 86kPA
Service Temperature-94 - 221°F
-70 - 105°C
- Plastazote LD50CN is a closed-cell, cross-linked polyethylene foam with conductive capabilities and has a nominal density of 3.1 PCF / 50 kg/m³. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of .85 mm and a thermal conductivity of 0.042 W/m.K.LD50CNKanban InventoryShore Hardness
73 - 73
Density3.1 - 3.1PCF (lb/ft³)
50 - 50Kg/m³
Compression20.1 - 20.1psi
139 - 139kPA
Service Temperature-94 - 221°F
-70 - 105°C
Material Database
Material Database
Our inventory offering of raw materials can fluctuate based on ongoing custom projects. Some materials may not be available at the time of your inquiry. Please let us know the material(s) you need and we will work with you to find a solution.
Material categories
- Foams
- Cork
- ECH
- Elastomeric Blend
- EPDM
- EPDM / Butyl Blend
- EPDM / Butyl / PE Blend
- EPDM / SBR Blend
- EVA
- EVA / Polyethylene
- Micro-cell Urethane
- Natural Rubber
- Neoprene Based
- Neoprene / EPDM / SBR Blend
- Neoprene / EPT / SBR Blend
- Neoprene / SBR Blend
- Polyester Urethane
- Polyethylene
- Polyether Urethane
- PVC
- PVC / NBR Blend
- PVC / NBR / Neoprene Blend
- Reticulated Urethane
- Adhesives
- Textiles
- Construction Products
- Corraflex
Quotes
Our customers tell us every day how much they appreciate our quick turnaround on quotes. If the requested material is in our Kanban inventory, you’ll have our quote in your inbox before any of our competitors.
Material Samples
Kanban material samples are available in 12" x 12" swatches. If a sample needs to be cut to a custom thickness, size or shape, simply let us know. We will try to produce your item as quickly as possible. If you require a unique material, J&T will work with our supply base to locate the right item. Of course, we will always recommend suitable materials as a second option, should we have direct access to them.