Materials

SN

Our SN adhesive is a double-coated, aggressive rubber based adhesive system with a 0.5 mil mylar carrier between 1.4 mil & 1.6 mil coat weights. The liner side adhesive exhibits excellent bonding capabilities to a wide variety of foams, felts and corks.

Product Description

Our SN adhesive is a double-coated, aggressive rubber based adhesive system with a 0.5 mil mylar carrier between 1.4 mil & 1.6 mil coat weights. The liner side adhesive exhibits excellent bonding capabilities to a wide variety of foams, felts and corks.

Applications & Features

Developed for a wide use of end market applications; for bonding to urethane and polyethylene foams, closed cell rubbers, cork, felt and much more. Great tape where kiss cutting is required. Polyester carrier offers additional dimensional support and enhanced die-cut ability characteristics. Widely used in automotive applications.

Type

SN adhesive is constructed with specially designed, aggressive permanent adhesives both liner side and air side. This product has been tested in skin contact applications and meets the requirements for CFR0175.21 use in food contact area. This adhesive system has been approved for flammability per FMVSS302 and UL723, 25/50 smoke/spread.

Technical Data

Physical PropertiesTypical ValueTest Method
Liner sideLaminating side
Thickness, mils.
Adhesive
Carrier -0.5
1.41.6
Peel Adhesion, oz/in.
Stainless Steel
ABS
155
100
95
75
PSTC-101/
ASTM D3330
Polyken Probe Tack, gm1875+1450+ASTM D 2979
Shear Adhesion, minutes
1 in2 @0.5&1kg
10,000+10,000+PSTC-107 /
ASTMD3654
Elevated temperature test185°F180°FASTM D 4498