SE

Our SE adhesive is a double-coated high performance solvent acrylic system, with 1.5 mil coat weight on each side of a 0.5 mil mylar carrier. SE was developed to promote excellent wet-out to a variety of substrates, particularly low surface energy plastics such as HDPE, LDPE, PP, powder coated paints, and E-coated paints, while maintaining necessary chemical and heat resistance with high shear properties for a multitude of applications.

Product Description

Our SE adhesive is a double-coated high performance solvent acrylic system, with 1.5 mil coat weight on each side of a 0.5 mil mylar carrier. SE was developed to promote excellent wet-out to a variety of substrates, particularly low surface energy plastics such as HDPE, LDPE, PP, powder coated paints, and E-coated paints, while maintaining necessary chemical and heat resistance with high shear properties for a multitude of applications.

Applications & Features:

  • SE is constructed with a high performing solvent acrylic adhesive on both linerside and airside
  • Developed to promote excellent wet-out to a variety of substrates, particularly low surface energy plastics such as
    HDPE, LDPE, PP, powder coated paints, and E-coated paints, while maintaining necessary chemical and
    heat resistance with high shear properties for a multitude of applications

Technical Data

Physical Properties Typical Value
Liner Laminating Test Method
Thickness, mils
Adhesive
Carrier – 0.5
1.5 1.5 PSTC-33 & ASTM 3652
180° Peel Strength, oz/in.
– Stainless Steel (20 min. dwell)
– ABS (20 min. dwell)
– 104
– 65
– 104
– 65
PSTC-1 & ASTM 3330
Shear Strength, minutes
(1” x 1”, 500 grams, PET)
+10,000 +10,000 PSTC-7 & ASTM 3654
Polyken Probe Tack, grams
(1 sec. dwell, 0.5 cm/sec)
1875 1875 ASTM 2979
SAFT
(1” x 1”, 500 grams, PET)
+215°F +215°F ASTM 4498
Shelf life Recommended consuming within a year of purchase.
Best if stored with protective packaging in controlled
environment
(72°F and 50% R.H.) out of direct sunlight.
Close