SD

Our SD differential adhesive system is a double-coated product which uses a solvent based acrylic adhesive on the customer side and a rubber based adhesive on the laminating side. SD uses a 1 mil tissue carrier to provide conformability and some dimensional stability during the end-use application. The special acrylic adhesive provides excellent wet-out to low surface energy plastics while maintaining heat resistance and shear properties.

Product Description

Our SD differential adhesive system is a double-coated product which uses a solvent based acrylic adhesive on the customer side and a rubber based adhesive on the laminating side. SD uses a 1 mil tissue carrier to provide conformability and some dimensional stability during the end-use application. The special acrylic adhesive provides excellent wet-out to low surface energy plastics while maintaining heat resistance and shear properties.

Applications & Features:

  • Designed with an airside system which provides dynamic bond laminating to a wide range of foams
    and rubbers
  • Linerside adhesive is a specially formulated acrylic system for excellent wet-out to low surface energy plastics while maintaining heat resistance and high shear properties
  • Constructed with a tissue carrier for conformability and dimensional stability.

Technical Data

Physical Properties Typical Value Test Method
Liner Laminating
Peel Adhesion, lbs/in.
– Stainless Steel
– ABS
– PP
 

– 5.5
– 5.0
– 4.0

– 5.5 PSTC-101
Shear Adhesion, minutes
1”x1” @ 0.5 & 1 kg
+10,000 +10,000 PSTC-107
Thickness, mils.
Adhesive
Carrier – 2.0
1.5 1.8
 Elevated temperature test – Adhesive 250°F ASTM D 4498
Close