SB
Our SB adhesive is a double-coated high-performance differentially coated pressure-sensitive adhesive, with a 1.4 mil rubber-based liner side and a 1.8 mil acrylic-based exposed side. SB provides good adhesion to difficult substrates such as polyolefins, powder coated paints, and E-coated paints.
SKU: SB
Category: Differential Adhesives
Tags: Bonding to: Urethane foams PVC sponge sponge rubber, Kanban Inventory, Metal & Plastic
Product Description
Our SB adhesive is a double-coated high-performance differentially coated pressure-sensitive adhesive, with a 1.4 mil rubber-based liner side and a 1.8 mil acrylic-based exposed side. SB provides good adhesion to difficult substrates such as polyolefins, powder coated paints, and E-coated paints.
Applications & Features:
- SB is used as a laminating adhesive system for bonding to urethane foams, PVC sponge, sponge
rubber and other foams to plastic and metal substrates - Good adhesion to difficult substrates: Polyolefins (HDPE, LDPE, Polypropylene), Powder coated
paints, and E-coated paints - This PSA is certified to the following automotive specifications: GM3622M Type IV, ESB-M11P8-A.
Technical Data
Physical Properties | Typical Value | ||
Liner | Laminating | Test Method | |
Peel Adhesion, lbs/in. Stainless Steel – 20 min. |
7.5 | 3.0 | PSTC-101 |
Thickness, mils. Adhesive Carrier – 0.5 |
1.4 | 1.8 | PSTC-101 |
SAFT | 170°F | 300°F | PSTC-7 |
Shelf life | One year |
Related products
-
Our 1420 foam is a 3-5 PCF / 48 – 80 kg/m³ EPDM product. This material is flexible and has good UV resistance capabilities. Our 1420 EPDM is widely used in the automotive industry but can also be trusted in a variety of industrial applications. When combined with our GE adhesive, 1420 meets Ford WSS-M11P62. It has an Ozone Resistance Rating of O.1420Shore Hardness
30 - 40
Density3 - 5PCF (lb/ft³)
48 - 80Kg/m³
Compression2 - 5psi
13.7 - 34.4kPA
Service Temperature-70 - 250°F
-56 - 121°C
-
Our PL double-sided differential adhesive system uses a 1.5 mil high-tack, low dead load acrylic adhesive on the exposed side and a 1.3 mil high-tack rubber based adhesive on the user side. The 0.5 mil mylar carrier provides excellent stability during die cutting and end use. PL works well with some PVC, urethanes, neoprene closed cell rubber products, cork and rubber compositesPLKanban Inventory
-
Our 9690 laminating adhesive is a double sided 2.0 / 2.3 mil acrylic adhesive system (#300MP). This adhesive has a black 0.5 mil mylar carrier and a 6.4mil 86 lb. poly coated kraft paper liner. This smooth adhesive provides good adhesion to most plastics and foams while the polycoated kraft paper liner maintains moisture stability. This material has a high resistance threshold of 150F for prolonged use, or 300F for minimal use.9690Kanban Inventory
-
Our 9675 is a 5.0 mil high performance acrylic adhesive with fibre reinforcement on a 4.0 mil 86 lb. poly coated tan paper liner. This adhesive is good for joining similar and dissimilar materials requiring high bond, shear resistance and temperature performance.9675Kanban Inventory