Materials

S166

Our S166 is a soft and flexible EPDM foam with a density of 5 – 6 PCF / 65 – 95 kg/m³. Our S166 is a 2A1 grade. This material has good compression set performance and a service temperature range of -40F to 248 °F / -40 to 120°C.

SKU: S166 Category: Tag:

Product Description

Our S166 is a soft and flexible EPDM foam with a density of 5 – 6 PCF / 65 – 95 kg/m³. Our S166 is a 2A1 grade. This material has good compression set performance and a service temperature range of -40F to 248 °F / -40 to 120°C.

Measurements

Shore Hardness

20 - 20

Density

4 - 6PCF (lb/ft³)

65 - 95Kg/m³

Compression

2.1 - 5.1psi

15 - 35kPA

Service Temperature

-40 - 284°F

-40 - 140°C

Technical Data

Item Specs Test Method
Grade 2A1 ASTM D1056-00
Density (PCF) (kg/m3) 4–6
65 – 95
ASTM D 1056
Compression Deflection (CFD)(psi)(kPa) @25% 2.1 – 5.1
15 – 35
ASTM D 1056
Shore Hardness OO (Durometer) 20
Compression Set (%) @50% ≤ 35 ASTM D1056
Tensile Strength (psi)(kPa) ASTM D 412, Die A
Elongation (%)
Tear Strength Resistance (ppi)(lb/in) ≥ 1.7
Water Absorption by Weight % ≤ 5 ASTM D 1056
Accelerated Age Testing:
Service Temperature (°C)(°F)
– Low
– High Continuous
– High intermittent
-40°C | -40°F
120°C | 248°F
140°C | 284°F
Flame Resistance Pass
HBF ≥ 3mm
FMVSS302
UL 94
Industry and OEM Specifications:
Jacobs and Thompson Inc. certifies that the following
product meets the required specifications;
BMW S 603 00.0
A 941 EPDM 3 1 0.05
GMW 17408 Class II Type IV
PSA B65 4360
EPDM 08 X C2 04/08 4100X0
RENAULT 03-10-102
2 C 04/08 B4 C2 P1 except tearing resistance
VW TL 52065
Depends on drawing requirements
Close