LD60
Plastazote LD60 is a closed-cell, cross-linked polyethylene foam with a nominal density of 3.7 PCF / 60 kg/m³. It comes in Black or White. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.6 mm and a thermal conductivity of 0.0518 W/m.K.
Product Description
Plastazote LD60 is a closed-cell, cross-linked polyethylene foam with a nominal density of 3.7 PCF / 60 kg/m³. It comes in Black or White. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.6 mm and a thermal conductivity of 0.0518 W/m.K.
Measurements
| Shore Hardness | 70 - 70 |
|---|---|
| Density | 3.7 - 3.7PCF (lb/ft³) 60 - 60Kg/m³ |
| Compression | 18.1 - 18.1psi 125 - 125kPA |
| Service Temperature | -94 - 221°F -70 - 105°C |
Technical Data
| Item | Specs | Test Method |
| Grade | ||
| Density (PCF) (kg/m3) | 3.7 PCF 60 kg/m3 | BS ISO 7214 1998 |
| Compression Deflection (CFD)(psi)(kPa) @10% @25% @40% @50% | 15.9 psi / 110 kPa 18.1 psi / 125 kPa 23.7 psi / 164 kPa 30.1 psi / 208 kPa | BS ISO 7214 1998 |
| Shore Hardness OO (Durometer) | 70 | ISO 868 1985 |
| Compression Set (%) 22hr, 23°C @25%: 1/2 hr recovery – 24 hrs recovery @50%: 1/2 hr recovery – 24 hrs recovery | 5.5 2 14.5 6.5 | BS ISO 7214 1998 25mm cell-cell |
| Tensile Strength (psi)(kPa) | 94.2 psi 650 kPa | ISO 7214 1998 |
| Elongation (%) | 165 | ISO 7214 1998 |
| Tear Strength Resistance (N/m) | 1720 | BS EN ISO 8067 1995 |
| Water Absorption by Weight (lb/ft2) | ||
| Accelerated Age Testing | ||
| Service Temperature (°C)(°F) – Low – High intermittent | -70°C | -94°F 105°C | 221°F | |
| Flame Resistance | Pass 4 mm and thicker 5mm thick: 1.0 mm/sec 13mm thick: 0.5 mm/sec | FMVSS302 (<100mm/min) Horizontal burn rate ISO 7214 1998 |
| Industry and OEM Specifications: Jacobs and Thompson Inc. certifies that the following product meets the required specifications; | FMVSS302 |