LD50CN
Plastazote LD50CN is a closed-cell, cross-linked polyethylene foam with conductive capabilities and has a nominal density of 3.1 PCF / 50 kg/m³. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of .85 mm and a thermal conductivity of 0.042 W/m.K.
Product Description
Plastazote LD50CN is a closed-cell, cross-linked polyethylene foam with conductive capabilities and has a nominal density of 3.1 PCF / 50 kg/m³. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of .85 mm and a thermal conductivity of 0.042 W/m.K.
Measurements
| Shore Hardness | 73 - 73 |
|---|---|
| Density | 3.1 - 3.1PCF (lb/ft³) 50 - 50Kg/m³ |
| Compression | 20.1 - 20.1psi 139 - 139kPA |
| Service Temperature | -94 - 221°F -70 - 105°C |
Technical Data
| Item | Specs | Test Method |
| Grade | ||
| Density (PCF) (kg/m3) | 3.1 PCF 50 kg/m3 | BS ISO 7214 1998 |
| Compression Deflection (CFD)(psi)(kPa) @10% @25% @40% @50% | 17.4 psi / 120 kPa 20.1 psi / 139 kPa 24.9 psi / 172 kPa 31 psi / 214 kPa | BS ISO 7214 1998 |
| Shore Hardness OO (Durometer) | 73 | ISO 868 1985 |
| Compression Set (%) 22hr, 23°C @25%: 1/2 hr recovery – 24 hrs recovery @50%: 1/2 hr recovery – 24 hrs recovery | 7.5 3.5 16 10 | BS ISO 7214 1998 25mm cell-cell |
| Tensile Strength (psi)(kPa) | 74.7 psi 515 kPa | ISO 7214 1998 |
| Elongation (%) | 65 | ISO 7214 1998 |
| Tear Strength Resistance (N/m) | 800 | BS EN ISO 8067 1995 |
| Water Absorption by Weight (lb/ft2) | ||
| Accelerated Age Testing | ||
| Service Temperature (°C)(°F) – Low – High intermittent | -70°C | -94°F 105°C | 221°F | |
| Flame Resistance | Pass 5 mm and thicker 5mm thick: 1.0 mm/sec 13mm thick: 0.7 mm/sec | FMVSS302 (<100mm/min) Horizontal burn rate ISO 7214 1998 |
| Industry and OEM Specifications: Jacobs and Thompson Inc. certifies that the following product meets the required specifications; | FMVSS302 ASTM D991-89 10^3 ohm.cms |