Materials

LD33

Plastazote LD33 is a closed-cell, cross-linked polyethylene foam and has a nominal density of 2 PCF / 33 kg/m³. It comes in either Black or White. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.37 mm and a thermal conductivity of 0.0405 W/m.K.

Product Description

Plastazote LD33 is a closed-cell, cross-linked polyethylene foam and has a nominal density of 2 PCF / 33 kg/m³. It comes in either Black or White. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.37 mm and a thermal conductivity of 0.0405 W/m.K.

Zotefoams

Measurements

Shore Hardness

58 - 58

Density

2 - 2PCF (lb/ft³)

33 - 33Kg/m³

Compression

10 - 10psi

69 - 69kPA

Service Temperature

-94 - 212°F

-70 - 100°C

Technical Data

Item Specs Test Method
Grade
Density (PCF) (kg/m3) 2 PCF
33 kg/m3
BS ISO 7214 1998
Compression Deflection (CFD)(psi)(kPa)
@10%
@25%
@40%
@50%
7.4 psi / 51 kPa
10 psi / 69 kPa
14.8 psi / 102 kPa
19.8 psi / 137 kPa
BS ISO 7214 1998
Shore Hardness OO (Durometer) 58 ISO 868 1985
Compression Set (%) 22hr, 23°C
@25%: 1/2 hr recovery
– 24 hrs recovery
@50%: 1/2 hr recovery
– 24 hrs recovery
10
3
22.5
13.5
BS ISO 7214 1998
25mm cell-cell
Tensile Strength (psi)(kPa) 63.8 psi
440 kPa
ISO 7214 1998
Elongation (%) 155 ISO 7214 1998
Tear Strength Resistance (N/m) 785 BS EN ISO 8067 1995
Water Absorption by Weight (lb/ft2)
Accelerated Age Testing
Service Temperature (°C)(°F)
– Low
– High intermittent
-70°C | -94°F
100°C | 212°F
Flame Resistance Pass 7 mm and thicker
5mm thick = 1.6 mm/sec
13mm thick = 1 mm/sec
FMVSS302 (<100mm/min) Horizontal Burn Rate: ISO 7214 1998
Industry and OEM Specifications:
Jacobs and Thompson Inc. certifies that the following
product meets the required specifications;
FMVSS302
Close