LD29
Plastazote LD29 is a closed-cell, cross-linked polyethylene foam with a nominal density of 1.8 PCF / 29 kg/m³. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.65 mm and a thermal conductivity of 0.039 W/m.K.
Product Description
Plastazote LD29 is a closed-cell, cross-linked polyethylene foam with a nominal density of 1.8 PCF / 29 kg/m³. It is manufactured with Zotefoams’ unique chemical-free nitrogen infusion process, producing an environmentally friendly product with low VOCs. It is available in sheet form and can be thermoformed into different shapes. It has a cell size of 0.65 mm and a thermal conductivity of 0.039 W/m.K.
Measurements
| Shore Hardness | 53 - 53 |
|---|---|
| Density | 1.8 - 1.8PCF (lb/ft³) 29 - 29Kg/m³ |
| Compression | 9.2 - 9.2psi 64 - 64kPA |
| Service Temperature | -94 - 212°F -70 - 100°C |
Technical Data
| Item | Specs | Test Method |
| Grade | ||
| Density (PCF) (kg/m3) | 1.8 PCF 29 kg/m3 | BS ISO 7214 1998 |
| Compression Deflection (CFD)(psi)(kPa) @10% @25% @40% @50% | 6.8 psi / 47 kPa 9.2 psi / 64 kPa 14 psi / 97 kPa 19 psi / 131 kPa | BS ISO 7214 1998 |
| Shore Hardness OO (Durometer) | 53 | ISO 868 1985 |
| Compression Set (%) 22hr, 23°C @25%: 1/2 hr recovery – 24 hrs recovery @50%: 1/2 hr recovery – 24 hrs recovery | 10.5 3 23.5 14 | BS ISO 7214 1998 25mm cell-cell |
| Tensile Strength (psi)(kPa) | 54.3 psi 375 kPa | ISO 7214 1998 |
| Elongation (%) | 140 | ISO 7214 1998 |
| Tear Strength Resistance (N/m) | 740 | BS EN ISO 8067 1995 |
| Water Absorption by Weight (lb/ft2) | ||
| Accelerated Age Testing | ||
| Service Temperature (°C)(°F) – Low – High intermittent | -70°C | -94°F 100°C | 212°F | |
| Flame Resistance | Pass 8 mm and thicker 5mm thick: 1.7 mm/sec 13mm thick: 1.2 mm/sec | FMVSS302 (<100mm/min) Horizontal Burn Rate ISO 7214 1998 |
| Industry and OEM Specifications: Jacobs and Thompson Inc. certifies that the following product meets the required specifications; | FMVSS302 – 8mm and thicker |