H16D
Our H16D is a very firm EPDM foam with a density of 21.5 – 26.5 PCF / 340 – 420 kg/m³. Our H16D is a 2A5 grade. This material has good compression set performance and a service temperature range of -40F to 212 °F / -40 to 100°C.
Product Description
Our H16D is a very firm EPDM foam with a density of 21.5 – 26.5 PCF / 340 – 420 kg/m³. Our H16D is a 2A5 grade. This material has good compression set performance and a service temperature range of -40F to 212 °F / -40 to 100°C.
Measurements
| Shore Hardness | 60 - 60 |
|---|---|
| Density | 21.5 - 26.5PCF (lb/ft³) 340 - 420Kg/m³ |
| Compression | 20.3 - 20.3psi 140 - 140kPA |
| Service Temperature | -40 - 248°F -40 - 120°C |
Technical Data
| Item | Specs | Test Method |
| Grade | 2A5 | ASTM D1056-00 |
| Density (PCF) (kg/m3) | 21.5 – 26.5 340 – 420 | ASTM D 1056 |
| Compression Deflection (CFD)(psi)(kPa) @25% | 20.3 140 | ASTM D 1056 |
| Shore Hardness OO (Durometer) | 60 | |
| Compression Set (%) @50% | ≤ 35 | ASTM D1056 |
| Tensile Strength (psi)(kPa) | ASTM D 412, Die A | |
| Elongation (%) | ||
| Tear Strength Resistance (ppi)(lb/in) | ≥ 5.7 | |
| Water Absorption by Weight % | ≤ 5 | ASTM D 1056 |
| Accelerated Age Testing: | ||
| Service Temperature (°C)(°F) – Low – High Continuous – High intermittent | -40°C | -40°F 100°C | 212°F 120°C | 248°F | |
| Flame Resistance | Pass | FMVSS302 |
| Industry and OEM Specifications: Jacobs and Thompson Inc. certifies that the following product meets the required specifications; | BMW S 603 00.0 A 941 EPDM 3 1 0.23 GMW 17408 Class II Type VII PSA B65 4360 EPDM 14 X C2 16 1100X0 RENAULT 03-10-102 2 C 16/30 B4 C2 P2 VW TL 52065 Depends on drawing requirements |