2400
Our 2400 white polyethylene has a density range of 1.8 to 2.7 PCF / 28.8 – 43.2 kg/m³. This material is produced in planks but can be converted to rolled goods. It has a good cold flexibility and an Electrostatic Decay of under 2 seconds. It has a compressive creep of 10%.
Product Description
Our 2400 white polyethylene has a density range of 1.8 to 2.7 PCF / 28.8 – 43.2 kg/m³. This material is produced in planks but can be converted to rolled goods. It has a good cold flexibility and an Electrostatic Decay of under 2 seconds. It has a compressive creep of 10%.
Measurements
| Shore Hardness | |
|---|---|
| Density | 1.8 - 2.7PCF (lb/ft³) 28.8 - 43.2Kg/m³ |
| Compression | 5.8 - 14.9psi 40 - 102kPA |
| Service Temperature | -30 - 180°F -34 - 82°C |
Technical Data
| Item | Specs | Test Method |
| Grade | ||
| Density (PCF) (kg/m3) | 1.8 – 2.7 PCF 28.8 – 43.2 kg/m3 | ASTM D 3575 |
| Compression Deflection (CFD)(psi)(kPa) @25% | 5.8 – 14.9 psi 40 – 102 kPa | ASTM D3575 |
| Shore Hardness OO (Durometer) | ||
| Compression Set (%) | 25 max | ASTM D 3575 |
| Tensile Strength (psi)(kPa) | 20.3 min psi 140 kPa | ASTM D412 |
| Elongation (%) | 30 min | ASTM D412 |
| Tear Strength Resistance (ppi) | 6 min | ASTM D 624 |
| Water Absorption by Weight (lb/ft2) | 0.02 | ASTM D 3575 |
| Accelerated Age Testing: Thermal stability (%) | ±5 | ASTM D 3575 |
| Service Temperature (°C)(°F) – Low – High Continuous – High intermittent | -34°C | -30°F 82°C | 180°F | |
| Flame Resistance | Pass 4.0″/min max | UL 94 / HF-2 GM 9070P |
| Industry and OEM Specifications: Jacobs and Thompson Inc. certifies that the following product meets the required specifications; | GM 6075M TYPE I |