Materials

1264

Our 1264 is a black blended closed-cell material and is a SBE43/2B3 grade of foam, with a density range of 7 – 9.5 PCF / 112 – 152 kg/m³. This material has good UV resistance and a temperature range of -40 °F to 200 °F. This foam grade is used in a wide range of applications where heat resistance and FR requirements are heightened. 1264 meets the aerospace FAR 25.853 a/b FR specification when the material is a minimum of 0.250 thick. It has a Fluid Immersion rate of 100% max.

Product Description

Our 1264 is a black blended closed-cell material and is a SBE43/2B3 grade of foam, with a density range of 7 – 9.5 PCF / 112 – 152 kg/m³. This material has good UV resistance and a temperature range of -40 °F to 200 °F. This foam grade is used in a wide range of applications where heat resistance and FR requirements are heightened. 1264 meets the aerospace FAR 25.853 a/b FR specification when the material is a minimum of 0.250 thick. It has a Fluid Immersion rate of 100% max.

Measurements

Shore Hardness

60 - 70

Density

7 - 9.5PCF (lb/ft³)

112 - 152Kg/m³

Compression

9 - 13psi

62 - 89.6kPA

Service Temperature

-40 - 200°F

-40 - 93°C

Technical Data

Item Specs Test Method
Grade SBE43
2B3
B3,C1,F1,M
ASTM D1056-68
ASTM D1056-14
Suffix
Density (PCF) (kg/m3) 7 – 9.5 PCF
112 – 152 kg/m3
ASTM D1056
Compression Deflection (CFD)(psi)(kPa) @25% 9 – 13 psi
62 – 89.6 kPa
ASTM D1056
Shore Hardness OO (Durometer) 60-70 ASTM D1056
Compression Set (%) @50% 35 max ASTM D1056
Tensile Strength (psi)(kPa) 100 psi min
689 kPa min
ASTM D 412
Elongation (%) 100 min ASTM D 412
Tear Strength Resistance (ppi)
Water Absorption by Weight % 5 max ASTM D1056
Accelerated Age Testing:
7 days @ 158F Change in CFD %
Liner shrinkage (7 days @ 158F) (%)
+/- 30
7 max
ASTM D-1056
ASTM C534
Service Temperature (°C)(°F)
– Low
– High Continuous
– High intermittent
-40°C | -40°F

93°C | 200°F

ASTM D-1056
Flame Resistance Pass
HF-1@1/16”
& V-0@1/4”
0.250 in (min)
FMVSS 302
UL 94 Recognized
FAR 25.853 a/b
Industry and OEM Specifications:
Jacobs and Thompson Inc. certifies that the following
product meets the required specifications;
ASTM D1056 2A3 2C3 2B3
MSZ-75 J18 2A3 2C3 2B3
MSAY 516 Type 3
WSK M2D 419-A Type 4
GMW15473 Class I Type V
TSM 1501G 2A3 2C3 2B3
Close